Mold making and processing: according to the requirements or sample specifications, the first step is to make a good blister mold. Generally, gypsum is used to make the blister packaging mold. However, Dongguan packaging material also uses wood carving and metal carving products as the mold. After the gypsum mold is made, first let it be naturally dry or dry, and then use 1-2 mm drill according to the specific conditions of the convex and concave surface of the product Many small holes should be drilled in the concave places that do not affect the packaging pattern of the products. If it is a packaging box or other products, some small holes should be drilled around the four sides, so that the air can be extracted during the blister production. After the mold is drilled, the gypsum mold must be hardened. The hardening treatment method is to soak in concentrated alum saturated solution and dry in the air.
2. After the mold is dry, put the mold into the iron plate on the upper layer of the vacuum chamber, and then load the plastic sheet into the applicable size according to the size of the mold, and then put the sheet into the heating wood cabinet to fix it, and then put the wood cabinet and the plastic sheet on the constant temperature furnace for softening treatment.
3. Put the softened plastic sheet together with the wooden cabinet in the vacuum chamber, turn on the air suction switch to suck the air in the vacuum chamber. After the plastic sheet is cooled, the concave packaging or process mold with the same mold can be obtained.
4. Blister packaging and finishing; trimming and finishing the produced products is the finished products, which can be sold after packaging.
Source: Jiangmen packaging materials http://www.jujiamap.com/
10-08
What are the advantages of Jiangmen packaging equipment
Automatic packaging machine equipment is easy to preserve the quality of products and transport, by people's love and recognition. The automation level of oso is constantly improving in the manufacturing industry, and its application scope is expanding. Automatic operation in packaging machinery industry is changing the action method of packaging process and the processing method of packaging containers and materials. The automatic control packaging system can greatly improve the production effi
10-08
How to adjust the cutter of Jiangmen packing equipment
1) the adjustment knife seat of end seal and cutter has been carefully adjusted and strictly checked before delivery. Under normal circumstances, there is no need to adjust it. If it is necessary to adjust the knife seat, first use two pieces of white paper with a carbon paper in the center to investigate the indentation pattern. If the indentation is uniform and the lines are clear, the cutter seat is in the correct position and does not need to be adjusted. Otherwise, it is necessary to adjust
10-08
What are the functions of Jiangmen packaging materials
Packaging material protection function is a product from the end of packaging to the arrival of customers, all through the loading and unloading, transportation, storage, display and other links. In every link, there are many factors causing package damage. Packaging protection refers to the need to avoid the loss of product quality and quantity caused by these damages in the logistics process, so as to ensure the smooth realization of product value and application value. Packaging material is t
10-08
Jiangmen packing material tells you the advantage of inner lining with pearl cotton board
The inner packing made of Jiangmen packing material plate is a kind of cushioning inner packing with certain characteristics of shock resistance, moisture resistance, sound insulation and heat insulation. Especially used in handicrafts, pearl cotton board and other decorative fabrics, flannelette, with impact maintenance effect, is also the development trend of packaging. Because the pearl cotton board is a bubble body, it is waterproof and sound-proof, moisture-proof, shock-proof, corrosion-res